Protects and displays the mug and at the same time easy to transport
Blister box with 2 tabs that are inserted inside the box to hold the mug to hold it in place
Outer white exterior with gloss finish, suitable for sublimation. Inside matte white
Easy assembly. Just place the mug on the base, insert the tabs of each window into the interior of the window and lift the sides mug and lift the sides until the windows are joined together handles
You can also buy this model from box with the handle in the shape of a heart at Related Products
THINGS TO KEEP IN MIND
Not included mug
To hold the sides together handles and close the box you can use adhesives, tape, staples, jute twine or double-sided staples, jute twine or ribbon, which you can find at Related Products
IMPORTANT RECOMMENDATIONS
The cardboard of this blister is coated on one side with a transparent film that can be sublimated. When exposed to temperatures above 150 °C, this film has a tendency to yellow. To reduce yellowing we recommend:
Iron the entire surface of the blister to even out the colour. Even if you only print a part of the blister
Make a printing full print. Hide the background colour with the design
Use sublimation paper with a grammage100-105 g/m2 for best results.
The measurements of the maximum size of the mug should be taken as follows: width (diameter base + handle) x height x base (diameter)
RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING
Parameters indicated with as a guideline. It is recommended to carry out preliminary tests in order to make the necessary adjustments before starting production.
Print the design in mode mirror
Preheat the press to 160 °C
Pre-press the blister pack upside down for 10 seconds to remove the humidity from the cardboard
Place the blister pack in the press with the shiny side up and the printed side of the blister on the shiny side of the blister paper on the shiny side of the blister. Secure with heat-sensitive tape
Close the press with medium pressure for 80 seconds
With the help of a protective glove, remove the blister from the blister pack sublimated
https://www.brildor.com/en/sublimation-mug-presentation-box-pack-10-units43186Sublimation Mug Presentation Box - Pack of 10 units<p class="enlace"><a id="saber-mas"></a> </p>
<h2>More information about the Sublimation Mug Presentation Box</h2>
<p> </p>
<p><strong>INDEX</strong></p>
<p>> <a href="#saber-mas1">Description</a></p>
<p>> <a href="#saber-mas2">Things to keep in mind</a></p>
<p>> <a href="#saber-mas7">Important recommendations</a></p>
<p>> <a href="#saber-mas3">Template for personalisation</a></p>
<p>> <a href="#saber-mas4">Dimensions (approx.)</a></p>
<p>> <a href="#saber-mas5">Recommended instructions and parameters for sublimation printing</a></p>
<p>> <a href="#saber-mas6">Related posts</a></p>
<p> </p>
<p class="enlace"><a id="saber-mas1"></a> </p>
<p><strong>DESCRIPTION</strong></p>
<ul>
<li>Presentation box or packaging suitable for a mug</li>
<li>Thin cardboard piece with 2 handles die-cuts</li>
<li>Protects and displays the mug and at the same time easy to transport<span class="azul-negrita"><br></span></li>
<li>Blister box with 2 tabs that are inserted inside the box to hold the mug to hold it in place</li>
<li>Outer white exterior with gloss finish, suitable for sublimation. Inside matte white</li>
<li>Easy assembly. Just place the mug on the base, insert the tabs of each window into the interior of the window and lift the sides mug and lift the sides until the windows are joined together handles</li>
<li>You can also buy this model from box with the handle in the shape of a heart at <strong>Related Products</strong></li>
</ul>
<p> </p>
<p class="enlace"><a id="saber-mas2"></a> </p>
<p><strong>THINGS TO KEEP IN MIND</strong></p>
<ul>
<li>Not included mug</li>
<li>To hold the sides together handles and close the box you can use adhesives, tape, staples, jute twine or double-sided staples, jute twine or ribbon, which you can find at <strong>Related Products</strong></li>
</ul>
<p> </p>
<p class="enlace"><a id="saber-mas7"></a> </p>
<p><strong>IMPORTANT RECOMMENDATIONS</strong></p>
<p>The cardboard of this blister is coated on one side with a transparent film that can be sublimated. When exposed to temperatures above <span class="azul-negrita">150 °C</span>, this film has a tendency to yellow. To reduce yellowing we recommend:</p>
<ul>
<li>Iron the entire surface of the blister to even out the colour. Even if you only print a part of the blister</li>
<li>Make a printing full print. Hide the background colour with the design</li>
<li>Use sublimation paper with a grammage<span class="azul-negrita">100-105 g/m<sup>2</sup></span> for best results.</li>
</ul>
<p> </p>
<p class="enlace"><a id="saber-mas3"></a> </p>
<p><strong>TEMPLATE FOR PERSONALISATION<br></strong></p>
<p><a title="Plantilla blíster sublimable para taza (.pdf - 0,229 MB)" href="https://www.brildor.com/media/upload/descargas/Plantilla_Brildor_Caja_para_Taza_Tipo_Blister_Sublimable_Ref_044998.pdf" target="_blank" rel="nofollow noopener">Sublimatable blister template for mug (.pdf - 0,229 MB)</a></p>
<p> </p>
<p class="enlace"><a id="saber-mas4"></a> </p>
<p><strong>DIMENSIONS (APPROX.)</strong></p>
<table>
<tbody>
<tr>
<td><strong>Mounted (cm)</strong></td>
<td class="azul-negrita">17 x 23 x 8,4 cm</td>
</tr>
<tr>
<td><strong>Base (cm)<br></strong></td>
<td><span class="azul-negrita">17 x 8,4<br></span></td>
</tr>
<tr>
<td><strong>Windows (cm)<br></strong></td>
<td class="azul-negrita">5 x 7</td>
</tr>
<tr>
<td><strong>Hole handle (cm)<br></strong></td>
<td class="azul-negrita">12 x 3</td>
</tr>
<tr>
<td><strong>Thickness (cm)<br></strong></td>
<td><span class="azul-negrita">0,04<br></span></td>
</tr>
<tr>
<td><strong>Disassembled (cm)<br></strong></td>
<td><span class="azul-negrita">54,4 x 17<br></span></td>
</tr>
<tr>
<td><strong>Maximum size mug (cm)</strong><strong><br></strong></td>
<td><span class="azul-negrita">13 x 9.5 x 8.4<br></span></td>
</tr>
<tr>
<td><strong>Print area (cm)<br></strong></td>
<td class="azul-negrita">54,4 x 17</td>
</tr>
<tr>
<td><strong>Weight box (g)<br></strong></td>
<td class="azul-negrita">25</td>
</tr>
<tr>
<td><strong>Weight pack (g)<br></strong></td>
<td><span class="azul-negrita">250<br></span></td>
</tr>
</tbody>
</table>
<ul>
<li><span style="font-size: 10pt;">The measurements of the <strong>maximum size</strong> of the <strong> mug should be taken as follows: width (</strong>diameter base + handle) x height x base (diameter)</span><strong><br></strong></li>
</ul>
<p> </p>
<p class="enlace"><a id="saber-mas5"></a> </p>
<p><strong>RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING</strong></p>
<p>Parameters indicated with <strong>as a guideline</strong>. It is recommended to carry out preliminary tests in order to make the necessary adjustments before starting production.</p>
<ul>
<li>Print the design in <strong>mode</strong> <strong> mirror</strong></li>
<li>Preheat the press to <span class="azul-negrita">160 °C</span></li>
<li>Pre-press the blister pack <strong>upside down</strong> for<span class="azul-negrita"> 10 seconds </span>to remove the humidity from the cardboard</li>
<li>Place the blister pack in the press with the shiny side up and the printed side of the blister on the shiny side of the blister paper on the shiny side of the blister. Secure with heat-sensitive tape</li>
<li>Close the press with <strong>medium pressure</strong> for <span class="azul-negrita">80 seconds</span></li>
<li>With the help of a protective glove, remove the blister from the blister pack sublimated</li>
<li>Carefully peel off the paper</li>
</ul>
<p> </p>
<p class="enlace"><a id="saber-mas6"></a> </p>
<p><strong>RELATED POSTS</strong></p>
<p><a title="Cajas para tazas personalizadas: mejora la experiencia y vende más" href="https://www.brildor.com/blog/es/cajas-tazas-personalizadas-mejora-experiencia-vende-mas/" target="_blank" rel="nofollow noopener">Boxes for mugs personalised: enhance the experience and sell more</a></p>https://www.brildor.com/media/catalog/product/c/a/caja-taza-blister-sublimable-pack-10-uds-d6.jpg3.99instock3.993.9900000https://www.brildor.com/media/catalog/product/c/a/caja-taza-blister-sublimable-pack-10-uds-d6.jpg191852008923209242004305943436/Packaging/Packaging/Embalajes para Tazas/Mug Boxes2021-12-02T11:28:39+0000
