Search
Starting at:
€7.96
/ Each Unit
Sublimation Handbag with Chain Leatherette Brown 11x20cm
Ref.
035770
Shoulder bag printable using the technique of dye sublimation printing.
- Brown synthetic leather with blank flapleather, suitable for sublimation
- Envelope style wallet with eyelets to attach the included link strap
- It has coin pouch, cash compartment, 6 credit card slots and 2 additional wide slots
- Print area 20 x 9 cm
Availability:
Immediate: 28 units
Please, give us an estimate of the quantity you need:
As a Premium Brildor Member, for each unit you buy, you will accumulate {{POINTS}}
to redeem on your next order. Discover the Brildor Loyalty Program.
For each unit you buy, you will accumulate {{POINTS}} to redeem
on your next order. Discover the Brildor Loyalty Program.
Tips for sublimation products difficult
More information about the Sublimation Handbag with Chain Leatherette Brown 11x20cm
INDEX
> Recommended instructions and parameters for sublimation printing
DESCRIPTION
- Can be used as a wallet as a handbag or as a party bag by attaching the carabiners on the chain to the bag
- Snap-rivet flap with snap rivet
- Coin purse with 2 compartments and snap fastener closure > 6 horizontal card slots zip fastening
- 6 horizontal card slots
- 2 wide vertical slots for notescoupons, notes...
THINGS TO KEEP IN MIND
- Leaves out the press the non-sublimatable part of the flap front. If this is not possible, cover it with heat tape, a piece of thick cardboard or paper or cardboard to prevent it from getting dirty or damaged during printing. printing
- Make sure that the heat tape does not touch the front side of the leatherette you might tear it off when peeling it off
DIMENSIONS
| Closed bag (cm) | 20,1 x 11 x 2,8 |
| Open bag (cm) |
20,1 x 22,5 |
| Hanging strap (cm) |
0,7 x 61,5 |
| Print area (cm) |
20 x 9 |
| Bag weight (g) |
162 |
| Weight with strap (g) |
249 |
RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING
- Print the design in mirror image
- Preheat the press to 200 ºC
- Removes the chain from the bag in case of wearing it
- Protects the non-sublimatable parts of the bag with flap with paper and keep them out of the bag
- Place the flap on the base of the press and the printed part of the paper on the flap. Fix it with thermal adhesive tape
- Make sure the heat tape does not touch the envelope. fabric synthetic leather You could tear it off when you peel it off
- Close the press with medium pressure for 40-45 seconds
- With the help of a protective glove remove the bag with the freshly sublimated flap with the freshly sublimated
- Carefully peel off the paper
| Ref. | 035770 |
|---|---|
| Gross Weight (kg) | 0.249 |
| Billable Weight (kg) | 0.2700 |
| Dimensions (mm) | 201 x 110 x 28 |
| Print area (mm) | 200 x 90 |
| Colour | Brown |
| Surface material | Metal, Tissue |
| Items | Billfolds, Handbags, Wallets |
| Composition | Faux leather |
| Accessory details | Zip, Foldable, Flaps |
| Marking techniques | Dye sublimation |
Write Your Own Review
Post your question