Designed to prepare tea, chamomile, lime blossom or any aromatic herb
Cylindrical body and lid threaded with details chrome-plated
Suitable for food consumption
With double wall from glass which functions as a insulating thermal. Keeps the hot liquid or cold for a long time
Filter with handle easy to remove. Includes side hooks to fix it by pressing it inside the filter
Customisable with sublimation oven using mug wraps, heat shrink bags o silicone sheets
Can also be customised with press for mugs using a resistor of 6-9 oz and a silicone sheet that wraps around the thermos flask. This will increase its diameter enough to match the resistance
THINGS TO KEEP IN MIND
It can be inserted into the microwave without the lid or the filter
RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING
Parameters are given for guidance only. It is recommended to carry out preliminary tests in order to make the necessary adjustments before starting production.
WITH CUP PLATE
Print on design in mode mirror
Pre-heats the thermos flask to avoid sudden changes in temperature which could break the glass
Preheat the press to 180 °C
Remove the lid and the filter from the thermos flask
Place the printed design around the thermos flask and fix it with adhesive heat tape
Place a silicone sheet around the thermos flask and adjust the resistance of 6-9 oz
Close the press with medium pressure for 35 seconds
With the help of a protective glove remove the thermos flask just sublimated
Carefully peel off the paper
It is not advisable to use water to cool the thermos flask after sublimation
WITH A SUBLIMATION OVEN
Print the design in mode mirror
Remove the lid and the filter from the thermos flask
Pre-heat the thermos flask to avoid sudden changes in temperature that could break the glass
Heat the oven to 180-200 ºC
Place the printed paper around the thermos flask and fix it with adhesive heat tape
Position and tighten the clamp or insert the thermos flask into a heat shrink bag and peel it off with the heat gun. You can also use a silicone sheet
Place the thermos flask in the oven for 8-12 minutes
With the help of a protective glove, remove the thermos flask from the oven printed
Carefully peel off the paper
It is not advisable to use water to cool the thermos flask after sublimation
https://www.brildor.com/en/sublimatable-glass-tea-thermo-300ml26209Sublimatable Glass Tea Thermo 300ml<p class="enlace"><a id="saber-mas"></a> </p>
<h2>More information about Sublimatable Glass Tea Thermo 300ml</h2>
<p> </p>
<p><strong>INDEX</strong></p>
<p>> <a href="#saber-mas1">Description</a></p>
<p>> <a href="#saber-mas6">Things to keep in mind</a></p>
<p>> <a href="#saber-mas2">Template</a></p>
<p>> <a href="#saber-mas3">Dimensions</a></p>
<p>> <a href="#saber-mas4">Recommended instructions and parameters for sublimation printing</a></p>
<p>> <a href="#saber-mas5">Related post</a></p>
<p> </p>
<p class="enlace"><a id="saber-mas1"></a> </p>
<p><strong>DESCRIPTION</strong></p>
<ul>
<li>Designed to prepare tea, chamomile, lime blossom or any aromatic herb</li>
<li>Cylindrical body and lid threaded with details chrome-plated</li>
<li>Suitable for food consumption</li>
<li>With double wall from glass which functions as a insulating thermal. Keeps the hot liquid or cold for a long time</li>
<li>Filter with handle easy to remove. Includes side hooks to fix it by pressing it inside the filter</li>
<li>Customisable with sublimation oven using mug wraps, heat shrink bags o silicone sheets</li>
<li>Can also be customised with press for mugs using a resistor of <span class="azul-negrita">6-9 oz </span>and a silicone sheet that wraps around the thermos flask. This will increase its diameter enough to match the resistance</li>
</ul>
<p> </p>
<p class="enlace"><a id="saber-mas6"></a> </p>
<p><strong>THINGS TO KEEP IN MIND</strong></p>
<ul>
<li>It can be inserted into the microwave <strong>without the lid or the filter</strong></li>
</ul>
<p> </p>
<p class="enlace"><a id="saber-mas2"></a> </p>
<p><strong>TEMPLATE</strong></p>
<p><a title="Plantilla termo de cristal para infusiones 300ml sublimable (.psd - 148 Kb)." href="https://www.brildor.com/media/upload/descargas/Plantilla_Botella_Especial_Infusiones.psd" target="_blank" rel="nofollow noopener">Template thermos flask for glass for infusions 300ml sublimable (.psd - 148 Kb).</a></p>
<p> </p>
<p class="enlace"><a id="saber-mas3"></a> </p>
<p><strong>DIMENSIONS</strong></p>
<table >
<tbody>
<tr >
<td ><strong>Capacity (oz≈ ml)<br></strong></td>
<td class="azul-negrita" >10 ≈ 300</td>
</tr>
<tr >
<td ><strong>Thermos with lid (cm)<br></strong></td>
<td ><span class="azul-negrita">Ø6,4 x 18<br></span></td>
</tr>
<tr >
<td ><strong>Thermos without lid (cm)<br></strong></td>
<td class="azul-negrita" >Ø6,4 x 15,4</td>
</tr>
<tr >
<td ><strong>Lid (cm)<br></strong></td>
<td ><span class="azul-negrita">Ø6,5 x 2,4<br></span></td>
</tr>
<tr >
<td ><strong>Filter (cm)<br></strong></td>
<td ><span class="azul-negrita">Ø4,4 x 1,1<br></span></td>
</tr>
<tr >
<td ><strong>Filter holes (cm)<br></strong></td>
<td ><span class="azul-negrita">Ø0,2<br></span></td>
</tr>
<tr >
<td ><strong>Print area (cm)<br></strong></td>
<td ><span class="azul-negrita">21 x 15<br></span></td>
</tr>
<tr >
<td ><strong>Presentation box (cm)<br></strong></td>
<td ><span class="azul-negrita">7,1 x 19,6 x 7,1<span class="azul-negrita"><br></span></span></td>
</tr>
</tbody>
</table>
<p> </p>
<p class="enlace"><a id="saber-mas4"></a> </p>
<p><strong>RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING</strong></p>
<p>Parameters are given for <strong>guidance only</strong>. It is recommended to carry out preliminary tests in order to make the necessary adjustments before starting production.</p>
<p><strong>WITH CUP PLATE</strong></p>
<ul>
<li>Print on design in <strong>mode</strong> <strong> mirror</strong></li>
<li>Pre-heats the thermos flask to avoid sudden changes in temperature which could break the glass</li>
<li>Preheat the press to<span class="azul-negrita"> 180 °C</span></li>
<li>Remove the lid and the filter from the thermos flask</li>
<li>Place the printed design around the thermos flask and fix it with adhesive heat tape</li>
<li>Place a silicone sheet around the thermos flask and adjust the resistance of <span class="azul-negrita">6-9</span> <span class="azul-negrita"> oz</span></li>
<li>Close the press with <strong>medium pressure</strong> for <span class="azul-negrita">35 seconds</span></li>
<li>With the help of a protective glove remove the thermos flask just sublimated</li>
<li>Carefully peel off the paper</li>
<li>It is not advisable to use water to cool the thermos flask after sublimation</li>
</ul>
<p><strong>WITH A SUBLIMATION OVEN</strong></p>
<ul>
<li>Print the design in <strong>mode</strong> <strong> mirror</strong></li>
<li>Remove the lid and the filter from the thermos flask</li>
<li>Pre-heat the thermos flask to avoid sudden changes in temperature that could break the glass</li>
<li>Heat the oven to <span class="azul-negrita">180-200 ºC</span></li>
<li>Place the printed paper around the thermos flask and fix it with adhesive heat tape</li>
<li>Position and tighten the clamp or insert the thermos flask into a heat shrink bag and peel it off with the heat gun. You can also use a silicone sheet</li>
<li>Place the thermos flask in the oven for <strong><span class="azul-negrita">8-12 minutes</span></strong></li>
<li>With the help of a protective glove, remove the thermos flask from the oven printed</li>
<li>Carefully peel off the paper</li>
<li>It is not advisable to use water to cool the thermos flask after sublimation</li>
</ul>
<p> </p>
<p class="enlace"><a id="saber-mas5"></a> </p>
<p><strong>RELATED POST</strong></p>
<p><a href="https://www.brildor.com/blog/en/oven-sublimation-using-heat-shrink-bags/" target="_blank" rel="nofollow noopener">Oven sublimation using heat shrink bags</a></p>https://www.brildor.com/media/catalog/product/b/o/botella-para-sublimacion-especial-infusiones.jpg5.6outofstock5.65.600000https://www.brildor.com/media/catalog/product/b/o/botella-para-sublimacion-especial-infusiones.jpg203922235525580/Blanks/Blanks/Water Bottles & Flasks/Blanks/Water Bottles & Flasks/Thermos Flasks/Blanks/Water Bottles and Flasks2021-07-24T05:36:51+0000