More information about the plastic kids water bottle and insert for sublimation
Perfect for carrying drinks to nursery, school, outings or the park.
Also suitable for baby food or cream thanks to its wide mouth.
BEP-FREE certified, food grade.
Cylindrical shaped container, lid with side button and adjustable strap.
Screwcap to prevent liquid spillage.
Safety lock lid and automatic push-button opening system. By pressing the button on the side of the lid, the cap pops open, and the nozzle is exposed, ready for use.
Long strap for shoulder carrying. It is extensible and is attached to the bottle on both sides.
The strap and lid can be easily removed from the body of the bottle for cleaning and personalisation.
You can also personalise it with other techniques such as self-adhesive vinyl, transfer or screen printing.
JIG (REF. 032441)
Strong metal in a cylinder shape.
Especially suitable to avoid heat deformation of the bottle during the printing process.
Easy to use. It is placed before inserting the bottle in the press or oven for sublimation and is removed when hot.
Reusable and long-lasting.
It can be used for plastic products such as cups, bottles, vases or plastic mugs.
THINGS TO KEEP IN MIND
Remove the lid and extendable strap before sublimating.
It is recommended to place the bottle horizontally to sublimate it in the oven. This prevents the base and mouth from melting when in contact with the oven.
DIMENSIONS (APPROX.)
Capacity
400 ml
Height
16.7 cm
Base
Ø7,8 cm
Lid
Ø8,4 x 6.7 cm
Straw
Ø0,5 x 13 cm
Minimum strap length
1 x 41 cm
Maximum strap length
1 x 81.5 cm
Print area (press)
18 x 7 cm
Print area (oven)
23 x 8.4 cm
Water bottle weight
165 g
INSERT
Dimensions
Ø7,5 x 12 cm
Inner diameter
Ø6,5 cm
Thickness
5 mm
Jig weight
318 g
Recommended instructions and parameters for sublimation printing
SUBLIMATION OVEN
Print the design in mirror image.
Preheat the sublimation oven to 200ºC
Place the paper with the printed part around the bottle and secure it with heat-resistant tape.
Adjust the wrap around it, or insert it in a heat shrink bag and create a vacuum with a heat gun. You can also use a silicone sheet.
Place the jig inside the bottle.
Sublimate inside the oven for 8 minutes
Remove the newly printed bottle using a protective glove.
Carefully remove the jig, the clamp or silicone sheet and then the paper.
MUG HEAT PRESS
Print the design in mirror image.
Preheat the press for mugs to 200ºC
Place the paper with the printed part around the bottle and secure it with heat-resistant tape.
Place the jig inside the bottle.
Press for 250 seconds, medium pressure.
After 250 seconds, turn the bottle 180º, and leave it for another 100 seconds
Remove the newly printed bottle using a protective glove.
https://www.brildor.com/en/sublimation-kids-water-bottle-jig-plastic43014Sublimation Kids Water Bottle & Insert - Plastic<p><a name="know-more"></a></p>
<h2>More information about the plastic kids water bottle and insert for sublimation</h2>
<ul>
<li>Perfect for carrying drinks to nursery, school, outings or the park.</li>
<li>Also suitable for baby food or cream thanks to its wide mouth.</li>
<li>BEP-FREE certified, food grade.</li>
<li>Cylindrical shaped container, lid with side button and adjustable strap.</li>
<li>Screwcap to prevent liquid spillage.</li>
<li>Safety lock lid and automatic push-button opening system. By pressing the button on the side of the lid, the cap pops open, and the nozzle is exposed, ready for use.</li>
<li>Long strap for shoulder carrying. It is extensible and is attached to the bottle on both sides.</li>
<li>The strap and lid can be easily removed from the body of the bottle for cleaning and personalisation.</li>
<li>You can also personalise it with other techniques such as <span class="azul-brildor-negrita">self-adhesive vinyl</span>, <span class="azul-brildor-negrita">transfer</span> or <span class="azul-brildor-negrita">screen printing</span>.</li>
</ul>
<p><strong>JIG (REF. 032441)</strong></p>
<ul>
<li>Strong metal in a cylinder shape.</li>
<li>Especially suitable to avoid heat deformation of the bottle during the printing process.</li>
<li>Easy to use. It is placed before inserting the bottle in the press or oven for sublimation and is removed when hot.</li>
<li>Reusable and long-lasting.</li>
<li>It can be used for plastic products such as cups, bottles, vases or plastic mugs.</li>
</ul>
<p><strong>THINGS TO KEEP IN MIND</strong></p>
<ul>
<li>Remove the lid and extendable strap before sublimating.</li>
<li>It is recommended to place the bottle horizontally to sublimate it in the oven. This prevents the base and mouth from melting when in contact with the oven.</li>
</ul>
<p> </p>
<p><strong>DIMENSIONS (APPROX.)</strong></p>
<table>
<tbody>
<tr>
<td>Capacity</td>
<td><span class="azul-negrita">400 ml</span></td>
</tr>
<tr>
<td>Height</td>
<td><span class="azul-negrita">16.7 cm<br></span></td>
</tr>
<tr>
<td>Base</td>
<td><span class="azul-negrita">Ø7,8 cm<br></span></td>
</tr>
<tr>
<td>Lid</td>
<td><span class="azul-negrita">Ø8,4 x 6.7 cm</span></td>
</tr>
<tr>
<td>Straw</td>
<td><span class="azul-negrita">Ø0,5 x 13 cm</span></td>
</tr>
<tr>
<td>Minimum strap length</td>
<td><span class="azul-negrita">1 x 41 cm<br></span></td>
</tr>
<tr>
<td>Maximum strap length</td>
<td><span class="azul-negrita">1 x 81.5 cm<br></span></td>
</tr>
<tr>
<td>Print area (press)</td>
<td><span class="azul-negrita">18 x 7 cm</span></td>
</tr>
<tr>
<td>Print area (oven)</td>
<td><span class="azul-negrita">23 x 8.4 cm</span></td>
</tr>
<tr>
<td>Water bottle weight</td>
<td><span class="azul-negrita">165 g</span></td>
</tr>
<tr>
<td colspan="2"><strong>INSERT</strong><span class="azul-negrita"><br></span></td>
</tr>
<tr>
<td>Dimensions</td>
<td><span class="azul-negrita">Ø7,5 x 12 cm</span></td>
</tr>
<tr>
<td>Inner diameter</td>
<td><span class="azul-negrita">Ø6,5 cm</span></td>
</tr>
<tr>
<td>Thickness</td>
<td><span class="azul-negrita">5 mm</span></td>
</tr>
<tr>
<td>Jig weight</td>
<td><span class="azul-negrita">318 g</span></td>
</tr>
</tbody>
</table>
<p><a name="know-more1"></a></p>
<h2> </h2>
<h2>Recommended instructions and parameters for sublimation printing</h2>
<p> </p>
<p><strong>SUBLIMATION OVEN<br></strong></p>
<ul>
<li>Print the design in <strong>mirror image</strong>.</li>
<li>Preheat the sublimation oven to <span class="azul-negrita">200ºC</span></li>
<li>Place the paper with the printed part around the bottle and secure it with heat-resistant tape.</li>
<li>Adjust the wrap around it, or insert it in a heat shrink bag and create a vacuum with a heat gun. You can also use a silicone sheet.</li>
<li>Place the jig inside the bottle.</li>
<li>Sublimate inside the oven for <span class="azul-negrita">8 minutes</span></li>
<li>Remove the newly printed bottle using a protective glove.</li>
<li>Carefully remove the jig, the clamp or silicone sheet and then the paper.</li>
</ul>
<p> </p>
<p><strong>MUG HEAT PRESS</strong></p>
<ul>
<li>Print the design in <strong>mirror image</strong>.</li>
<li>Preheat the press for mugs to <span class="azul-negrita">200ºC</span></li>
<li>Place the paper with the printed part around the bottle and secure it with heat-resistant tape.</li>
<li>Place the jig inside the bottle.</li>
<li>Press for <span class="azul-negrita">250 seconds</span>, <strong>medium</strong> pressure.</li>
<li>After <span class="azul-negrita">250 seconds</span>, turn the bottle <span class="azul-negrita">180º</span>, and leave it for another <span class="azul-negrita">100 seconds</span></li>
<li>Remove the newly printed bottle using a protective glove.</li>
<li>Remove the paper carefully.</li>
</ul>
<p> </p>https://www.brildor.com/media/catalog/product/b/o/botellas-plastico-infantil.jpg4.99instock04.99000https://www.brildor.com/media/catalog/product/b/o/botellas-plastico-infantil.jpg22456237042370724207246442649926870430154364948793/Blanks/Blanks/Water Bottles & Flasks/Blanks/Babies/Blanks/Back to School/Blanks/Water Bottles & Flasks/Water Bottles2021-10-19T09:49:35+0000
VACUUM-FREE OVEN SUBLIMATION WITH HEAT SHRINK BAGS
