€21.95 VAT not included / Each Unit

Silhouette Cameo 4 Kraft Blade - 3mm - Pack of 2 units

Ref.
038688

Silhouette 3 mm Kraft Blade designed to cut thick materials such as acetate, leather, balsa wood, EVA foam and burlap (sackcloth).

  • Automatically detected when inserted in the tool holder (Tool Holder 2).
  • Blade length range: 0.1 mm - 3 mm
  • To be used only with Silhouette Cameo 4, Plus and Pro vinyl cutters.

More information

Availability:
Immediate: 10 units
Our availability is not enough?
Let us know how much you need
I WANT MORE
€21.95 VAT not included / Each Unit
VAT not included
Reward Points
As a Premium Brildor Member, for each unit you buy, you will accumulate {{POINTS}} to redeem on your next order. Discover the Brildor Loyalty Program. For each unit you buy, you will accumulate {{POINTS}} to redeem on your next order. Discover the Brildor Loyalty Program.

More information about the 3 mm Kraft Blade for Cameo 4

  • The blade is automatically detected by the Silhouette Studio software. You will not need to select it.
  • Stainless steel blade, suitable for cutting materials up to 3 mm thick.
  • Manual adjustment of the cutting depth by twisting the lower part until the red line points to the desired value.
  • It may be recommended to use a strong-tack cutting mat when using the 3 mm Kraft Blade with certain materials.
  • It is convenient to cut heavier media gradually (using a series of passes), and manually adjust each material’s settings separately. This will prevent the blade from digging into the mat which could mess up the entire cut.
  • Presented in 2-unit blister packs.

INSTRUCTIONS FOR USE

  • Adjust the length of the blade according to the material to be cut.
  • Insert the blade in the right tool holder (Tool Holder 2).
  • Lock the tool by pushing the lock lever all the way in.
  • When working with a new type of material, you should always run some tests to find which settings will give you better results.
  • Once the design is ready in Silhouette Studio, click on “SEND” (top-right corner).
  • Select the settings for the material you will be cutting and send the design to the plotter.

More Information
Ref. 038688
Gross Weight (kg) 0.028
Billable Weight (kg) 0.0300
Write Your Own Review
Post your question