The store will not work correctly in the case when cookies are disabled.
The legal stuff about cookies:
This message requires us to tell you about our cookie policy. If you continue browsing, we'll assume you accept it and think it's okay.
Don't worry, this message only comes up once.
More information about the set of 2 tall sublimation mugs with ring handle
Perfect for Valentine's Day, anniversaries, birthdays and special occasions.
Original, elegant and minimalist design.
Cylindrical body and ring handle.
Printable on the entire outer surface.
Delivered in a cardboard box decorated with hearts.
Suitable for personalising with a heat press machine using 10 oz mug heaters. Also, with a sublimation oven using clamps, silicone sheets or heat shrink bags.
Can also be personalised with other techniques such as DTF, laser engraving, screen printing, transfer and self-adhesive vinyl.
DIMENSIONS (APPROX.)
Capacity
10 oz ≈ 300 ml
Inner diameter
Ø6,7 cm
Outer diameter
Ø7,3 cm
Thickness
3 mm
Base
Ø7 cm
Height
10 cm
Handle
2.7 x 3.3 cm
Mug-to-handle distance
3 cm
Print area
20 x 10 cm
Weight
548 g
Recommended instructions and parameters for sublimation printing
WITH A MUG HEAT PRESS
Print the design in mirror image.
Preheat the press to 200ºC
Hold the paper's printed side against the mug and fix it with heat resistant tape.
Press for 180-200 seconds, medium-heavy pressure.
Using a protective glove, remove the newly printed cup.
Carefully peel off the paper.
WITH A SUBLIMATION OVEN
Print the design in mirror image.
Preheat the sublimation oven to 200ºC
Hold the paper's printed side against the mug and fix it with heat resistant tape.
Tighten the clamp or slide the mug into a shrink bag and heat it with a heat gun. Make sure you get rid of all the wrinkles. You can also use a silicone sheet.
Place the mug in the oven for 8 minutes
Using a protective glove, remove the wrap, the silicone sheet, or the bag, depending on the accessory you used.