Loading..

Product was successfully added to your shopping cart.
€4.99

Face Shield - rPET Plastic - Clear

Ref. 039382

Face Shield - rPET Plastic - Clear

  • Face Shield - rPET Plastic - Clear - Example of use
  • Face Shield - rPET Plastic - Clear - Front foams and adjustable band
  • Face Shield - rPET Plastic - Clear - Side view
  • Face Shield - rPET Plastic - Clear - Rear view
  • Face Shield - rPET Plastic - Clear - Adjustable bands
  • Face Shield - rPET Plastic - Clear - Foams
  • Face Shield - rPET Plastic - Clear - Dimensions
  • Face Shield - rPET Plastic - Clear - Dimensions
€4.99

Face Shield - rPET Plastic - Clear

Ref. 039382

An antibacterial and anti-splash face shield you can personalise using vinyl and transfer. Specially designed to protect the mouth, nose and eyes.

  • Made of 500-micron 80% recycled PET (rPET).
  • Totally transparent, it does not reduce the visual field.
  • Adjustable. Can be used with glasses and a face mask.
  • Print area: 42 x 23.4 cm

More information about the clear rPET plastic face shield.

+ Read More
- Read Less
Availability:
  • Immediate: more than 100 units
  • Orders that exceed our availability are generally served in approx. 15 working days.

€4.99
/ Each Unit VAT not included
  • Buy 10 for €4.69 each

Brildor Club is a direct discount program for your purchases. Whenever you place an order (minimum purchase of €10), some discount balance will be generated into your customer account for you to use on your next purchase. The more you buy, the more you save.
You will get access to the Brildor Club as soon as you register as a new customer, and will receive a €5 welcome balance.

 

How do I get some discount balance?


As a Regular Brildor Member:

  • On orders up to €180, you may receive €0.20 for every €10 you spend
  • On orders over €180, you may receive €0.30 for every €10 you spend
  • We will give you an extra €10 if you make 10 purchases over €100


As a Premium Brildor Member:

If you are a Premium Member of the Brildor Club, you will accumulate 25% more balance, so you can obtain:

  • On orders up to €180, you may receive €0.25 for every €10 you spend
  • On orders over €180, you may receive €0.375 for every €10 you spend

  

Who are Premium Brildor Members?


If over the last 12 months your purchases have exceeded €3,000, you will automatically be upgraded to the Premium Brildor Member category. This amount is checked daily. As soon as you reach it, you will become a Premium Member the day after.

 

Terms and conditions of the Brildor Club

  • Loyalty balance will be added when placing an order with an immediate payment method (Credit/debit card, Paypal and Pagantis).
  • Your balance will show in the "Your credit" section inside "Your account", and you can use it by selecting "Payment methods".
  • You can use your balance without needing to have a minimum accumulated amount or reach a minimum order value. Nonetheless, you won't be able to get a higher discount than your order value.
  • Balance expires after 6 months without making any purchase.
  • The balance is calculated on the net amount of the purchase: excluding taxes, shipping, coupons, and promotional discounts.
  • The cancellation of an order implies the loss of the balance generated in that purchase.
  • On a full-order return, the amount to be refunded will be the amount paid by the customer.
  • If the return of the order is due to causes beyond the control of Brildor, the redeemed balance won't be restored. However, the balance generated with this purchase won't be removed.
Face Shield - rPET Plastic - Clear Description

More information about the clear rPET plastic face shield

  • Mask style, with a futuristic design. Manufactured entirely in Spain.
  • Comfortable, light and easy to put on and take off.
  • Made with a single piece of PET, customisable on its entire surface.
  • Includes 2 white foam pads to avoid direct contact between the shield and the forehead.
  • It has side straps that close at the back to fit the head.
  • Reusable. Can be sterilised and used again as many times as desired.
  • Suitable for contact with the skin.
  • Supplied unassembled in a plastic bag.
  • Can be personalised with vinyl as well as water-slide decal paper, which does not require heat to be applied.

DIMENSIONS (APPROX.)

        A   33.5 cm
 B
79 cm
 C 42 cm
 D 23.4 cm
 E 3.5 cm
 F 4.5 cm
 G 6 cm

Unassembled shield 79 x 33,5 cm
Thickness 1 mm
Foam Ø30 x 4 mm
Adjustment
From 3 cm to 13.5 cm
Print area 42 x 23.4 cm

RECOMMENDATIONS FOR THE CARE OF THE VISOR

  • In order for the face shields to continue to fulfil their protective function, they must be cleaned properly.
  • It is recommended to clean the visor with products intended for this type of material which do not contain aggressive substances.
  • If no special cleaning products are available, the visor can be washed with bleach and water, or with surgical spirit.
  • Not suitable for dishwashers.
  • Store in a place where it cannot be deformed by pressure.

ASSEMBLY INSTRUCTIONS

STEP 1: Mounting the front band containing the foam pads

  • Hold the side straps: one of them contains the foam pads and a flap, and the other a square hole.
  • Fold the flap inward. In other words, towards the inside of the visor.
  • Insert the flap into the hole and fold it again to prevent it from coming out of the hole.
  • Press on both sides to make sure the side straps are securely attached by the flap.

STEP 2: Mounting the band to adjust the visor to the head

  • Attach the side straps: one with the edges segmented like a saw, and the other with a slot.
  • Insert the band into the slot.
  • Extract the band from the other side of the slot and adjust to the size of the head.

IMPORTANT

More information on products for prevention against the spread of the COVID-19 virus in Spain (also known as coronavirus): Boletín Oficial del Estado - Núm. 109 del 19 de abril de 2020 (.pdf - 244 kB).

Additional Information
Reference nº 039 382
Gross Weight (kg) 0.076
Billable Weight 0.0830
Dimensions (mm) 790 x 335
Print area (mm) 420 x 234
Thickness (mm) 1
Colour Transparent
Items Face shield
Accessory details Adjustment accessory
Marking techniques Transfer Sheets, Transfer Paper, Adhesive Vinyl
Post your question

Questions and Answers

There are no entries.

Face Shield - rPET Plastic - Clear Description

More information about the clear rPET plastic face shield

  • Mask style, with a futuristic design. Manufactured entirely in Spain.
  • Comfortable, light and easy to put on and take off.
  • Made with a single piece of PET, customisable on its entire surface.
  • Includes 2 white foam pads to avoid direct contact between the shield and the forehead.
  • It has side straps that close at the back to fit the head.
  • Reusable. Can be sterilised and used again as many times as desired.
  • Suitable for contact with the skin.
  • Supplied unassembled in a plastic bag.
  • Can be personalised with vinyl as well as water-slide decal paper, which does not require heat to be applied.

DIMENSIONS (APPROX.)

        A   33.5 cm
 B
79 cm
 C 42 cm
 D 23.4 cm
 E 3.5 cm
 F 4.5 cm
 G 6 cm

Unassembled shield 79 x 33,5 cm
Thickness 1 mm
Foam Ø30 x 4 mm
Adjustment
From 3 cm to 13.5 cm
Print area 42 x 23.4 cm

RECOMMENDATIONS FOR THE CARE OF THE VISOR

  • In order for the face shields to continue to fulfil their protective function, they must be cleaned properly.
  • It is recommended to clean the visor with products intended for this type of material which do not contain aggressive substances.
  • If no special cleaning products are available, the visor can be washed with bleach and water, or with surgical spirit.
  • Not suitable for dishwashers.
  • Store in a place where it cannot be deformed by pressure.

ASSEMBLY INSTRUCTIONS

STEP 1: Mounting the front band containing the foam pads

  • Hold the side straps: one of them contains the foam pads and a flap, and the other a square hole.
  • Fold the flap inward. In other words, towards the inside of the visor.
  • Insert the flap into the hole and fold it again to prevent it from coming out of the hole.
  • Press on both sides to make sure the side straps are securely attached by the flap.

STEP 2: Mounting the band to adjust the visor to the head

  • Attach the side straps: one with the edges segmented like a saw, and the other with a slot.
  • Insert the band into the slot.
  • Extract the band from the other side of the slot and adjust to the size of the head.

IMPORTANT

More information on products for prevention against the spread of the COVID-19 virus in Spain (also known as coronavirus): Boletín Oficial del Estado - Núm. 109 del 19 de abril de 2020 (.pdf - 244 kB).

Additional Information

Reference nº 039 382
Gross Weight (kg) 0.076
Billable Weight 0.0830
Dimensions (mm) 790 x 335
Print area (mm) 420 x 234
Thickness (mm) 1
Colour Transparent
Items Face shield
Accessory details Adjustment accessory
Marking techniques Transfer Sheets, Transfer Paper, Adhesive Vinyl
Post your question

Questions and Answers

There are no entries.

The legal stuff about cookies:


This message requires us to tell you about ourcookie policy.

If you continue browsing, we'll assume you accept it and think it's okay.

Don't worry, this message only comes up once.