Loading..

Product was successfully added to your shopping cart.

DTF Printer Pack

DTF Printer Pack - A3

  • DTF Printer Pack - Personalisation example
  • DTF Printer Pack - Personalisation example
  • DTF Printer Pack - L1800 - Epson printer (modified)
  • DTF Printer Pack - L805 - Epson printer (modified)
  • DTF Printer Pack - L1800 - Refillable ink tanks
  • DTF Printer Pack - L805 - Refillable tanks and printing size adjustment
  • DTF Printer Pack - L1800 - Interface
  • DTF Printer Pack - L805 - Interface
  • DTF Printer Pack - Waste ink collector unit
  • DTF Printer Pack - Printed film
  • DTF Printer Pack - Printed film details
  • DTF Printer Pack - 10-film pack (A3)
  • DTF Printer Pack - DTF inks
  • DTF Printer Pack - DTF powder
  • DTF Printer Pack - AcroRip software

DTF Printer Pack

Direct To Film printing system to personalise almost any type of fabric regardless of its colour. This pack includes everything you need to start printing using this new technique without making a big investment.

This system includes:

  • Inkjet printer: modified for DTF.
  • DTF powder: 500 g bottle.
  • Fabric printing ink: 6 CMYK bottles + White + White (90 ml)
  • Film: 20 x A4 (Ref. 040297) or A3 (Ref. 040040) sheets.
  • AcroRip software: to manage the printing of the design.

More information

+ Read More
- Read Less
Availability: Shown on each product
  • Immediate:

Product Name Price Availability Qty
DTF Printer Pack - A4
DTF Printer Pack - A4
Ref. 040297
€999.00
  • Immediate: 4 units
DTF Printer Pack - A3
DTF Printer Pack - A3
Ref. 040040

€1,099.00 Before €1,290.00

Until 30-04-2021

  • Immediate: 3 units
VAT not included

For special requests, please contact customersupport@brildor.com.

Get free € to redeem on your next order by buying these products. Discover the Brildor Loyalty Program

Brildor Club is a direct discount program for your purchases. Whenever you place an order (minimum purchase of €10), some discount balance will be generated into your customer account for you to use on your next purchase. The more you buy, the more you save.
You will get access to the Brildor Club as soon as you register as a new customer, and will receive a €5 welcome balance.

 

How do I get some discount balance?


As a Regular Brildor Member:

  • On orders up to €180, you may receive €0.20 for every €10 you spend
  • On orders over €180, you may receive €0.30 for every €10 you spend
  • We will give you an extra €10 if you make 10 purchases over €100


As a Premium Brildor Member:

If you are a Premium Member of the Brildor Club, you will accumulate 25% more balance, so you can obtain:

  • On orders up to €180, you may receive €0.25 for every €10 you spend
  • On orders over €180, you may receive €0.375 for every €10 you spend

  

Who are Premium Brildor Members?


If over the last 12 months your purchases have exceeded €3,000, you will automatically be upgraded to the Premium Brildor Member category. This amount is checked daily. As soon as you reach it, you will become a Premium Member the day after.

 

Terms and conditions of the Brildor Club

  • Loyalty balance will be added when placing an order with an immediate payment method (Credit/debit card, Paypal and Pagantis).
  • Your balance will show in the "Your credit" section inside "Your account", and you can use it by selecting "Payment methods".
  • You can use your balance without needing to have a minimum accumulated amount or reach a minimum order value. Nonetheless, you won't be able to get a higher discount than your order value.
  • Balance expires after 6 months without making any purchase.
  • The balance is calculated on the net amount of the purchase: excluding taxes, shipping, coupons, and promotional discounts.
  • The cancellation of an order implies the loss of the balance generated in that purchase.
  • On a full-order return, the amount to be refunded will be the amount paid by the customer.
  • If the return of the order is due to causes beyond the control of Brildor, the redeemed balance won't be restored. However, the balance generated with this purchase won't be removed.
DTF Printer Pack Description

More information about the A3 DTF printer pack

  • New fabric personalisation technique: DTF means Direct To Film. This technique consists of printing a design onto a film and transferring it to a garment, accessories, and many more by applying heat.
  • Simple: easy to learn and apply, without the need for a major initial investment.
  • Versatile: it allows you to personalise almost any fabric, regardless of its colour. You can apply it on cotton, polyester, and blends of those two materials. It is also suitable for nylon and leather.
  • Excellent personalisation alternative: to apply where other techniques can’t be used or fail. It is the case with dye sublimation, which application is limited to white or light-coloured polyester fabrics.
  • Cheaper and less complex than other techniques: for example, white toner transfer. A + B sheets are more expensive, and the process is more complicated. DTF is similar to Sublimagic and No-Cut transfer but benefits from a lower cost and easier applicability.
  • Efficient: both in short and long print runs. You can print your design on the film and store it as you would for a screen print transfer until it is ready to be applied on a garment.
  • High-quality results: colourful prints with excellent elasticity, fully blended into the fabric. Very soft and pleasant to the touch.

DOWNLOAD HERE

What does Brildor’s DTF pack include?

Brildor’s DTF printing pack includes everything you need to start personalising at the lowest cost. All you need is a heat press.

1 Epson EcoTank L805 (Ref. 040297) or L1800 (Ref. 040040) inkjet printer, duly modified to work as a DTF printer(*)
1 USB dongle with AcroRip software to manage DTF printing colours properly
1 16 GB USB Flash Drive
6 90 ml water-based ink bottles (CMYK + White + White)
20 A4 (Ref. 040297) or A4 (Ref. 040040) translucent PET sheets
1 500 g bottle of adhesive powder

(*) Brildor offers a warranty of 30 calendar days, estimated time for installing and starting your printer, provided that all the consumables used have been purchased from Brildor.

DTF PRINTER (A4 & A3)

The printers included in this pack are the Epson L805 (Ref. 040297) or the L1800 (Ref. 040040) model. This high-quality inkjet printer has been modified to use the DTF printing technique. Both usability and hardware have been modified. Some of its features are described below:

  • Originally, this printer includes 6 refillable ink tanks for yellow, black, light cyan, light magenta, magenta, and cyan colours (Y, K, LC, LM, M, C).
  • In DTF printing, the tanks intended for light cyan and light magenta (LC and LM) will be used for the white ink. This will allow this colour to be used in the design and print the underbase.
  • Original front rollers have been removed to avoid print marks.
  • A maintenance tank has been added.
  • 2 trays are included. One standard pull-out tray and a flat one, acting as a support for the film. To prevent the printheads from touching the film, you must use the flat tray, as its height is in line with the film output. This will avoid ink mixing and shifting.
  • Connectivity: the L805 printer has both USB and Wi-Fi connections. The L1800 printer connects via USB only (Wi-Fi not supported)

PRINTER DIMENSIONS (APPROX.)

DTF A4
Ref. 040297
DTF A3
Ref. 040040
Max. print size 29.7 x 21 cm (DIN A4) 29.7 x 42 cm (DIN A3)
Printer dimensions 54,5 x 18,6 x 28 cm 70.5 x 21.5 x 32.2 cm
Flat tray dimensions 22,8 x 4,7 x 33 cm 33.5 x 7 x 39 cm
Net weight 6 kg 12.2 kg
Packaging 70 x 26 x 44 cm 85 x 34.3 x 48 cm


ACRORIP SOFTWARE

Acts as a translator for the original printer software, making it capable of printing coloured and white layers as required by the DTF technique.

  • It controls the print’s size and quality, manages its colour, the white underbase, and the order in which each layer is printed.
  • The white mask ensures that the colours of the design remain the same after being applied to the substrate.
  • Both the design and its underbase can be printed at the same time.
  • Compatible with Windows 10.
  • AcroRip is not compatible with macOS devices. If you are a Mac user, our recommendation is to install Parallels, VMware Fusion, or to create a Windows partition with Bootcamp.

FABRIC PRINTING INK

  • Water-based and thinner than the inks used for DTG printing.
  • They guarantee flexible prints blended with the fabric that doesn’t crack when stretched.


FILMS

They act as a support for the ink to transfer the design to the fabric.

  • Made of PET, a thermoplastic material highly resistant to heat and handling when applying this technique.
  • Similar to acetates but translucent. You can see the design on both sides of the film.
  • They keep the ink wet but prevent migration.


DTF POWDER

Polyamide powder that creates an adhesive layer on the film previously printed with the design:

  • They are spread on wet ink and will stick to it. The remaining powder can be reused.
  • Heat will solidify the powder and form an adhesive layer.

How to print cotton and polyester fabrics with DTF?

STEP 1. PREPARING THE FILM

  • Print the design on the film in mirror image, including a white top layer at the end.
  • Carefully remove the film from the printer without touching the wet ink.
  • Preheat the press to 165ºC (*)
  • Spread DTF powder on the printed design. Store the remaining powder in a container to protect it from humidity.
  • Place the film on the press’ lower platen and lower the upper platen to keep it 3-4 cm from the film, without touching it, for 2 minutes.

(*) If you don't want to apply the design onto the fabric immediately, you should cure the powder for 8-10 minutes at 190ºC. This will allow the film to work as a screen print transfer, and you will be able to use it whenever you like.

STEP 2. TRANSFERRING YOUR DESIGN TO THE FABRIC

  • If the garment is made of cotton, prepress it at 165ºC
  • Place the film on the area you want to print.
  • Press for 15 seconds at 165ºC, medium-heavy pressure when personalising cotton fabrics.
  • Press for 50 seconds at 140 ºC, medium-heavy pressure when personalising polyester fabrics.
  • Once the pressing time is finished, remove the fabric from the press and allow it to cool down.
  • Peel slowly but steadily.
  • Your garment is now ready!

Additional Information
Reference nº 927 384
Post your question

Questions and Answers

There are no entries.

DTF Printer Pack Description

More information about the A3 DTF printer pack

  • New fabric personalisation technique: DTF means Direct To Film. This technique consists of printing a design onto a film and transferring it to a garment, accessories, and many more by applying heat.
  • Simple: easy to learn and apply, without the need for a major initial investment.
  • Versatile: it allows you to personalise almost any fabric, regardless of its colour. You can apply it on cotton, polyester, and blends of those two materials. It is also suitable for nylon and leather.
  • Excellent personalisation alternative: to apply where other techniques can’t be used or fail. It is the case with dye sublimation, which application is limited to white or light-coloured polyester fabrics.
  • Cheaper and less complex than other techniques: for example, white toner transfer. A + B sheets are more expensive, and the process is more complicated. DTF is similar to Sublimagic and No-Cut transfer but benefits from a lower cost and easier applicability.
  • Efficient: both in short and long print runs. You can print your design on the film and store it as you would for a screen print transfer until it is ready to be applied on a garment.
  • High-quality results: colourful prints with excellent elasticity, fully blended into the fabric. Very soft and pleasant to the touch.

DOWNLOAD HERE

What does Brildor’s DTF pack include?

Brildor’s DTF printing pack includes everything you need to start personalising at the lowest cost. All you need is a heat press.

1 Epson EcoTank L805 (Ref. 040297) or L1800 (Ref. 040040) inkjet printer, duly modified to work as a DTF printer(*)
1 USB dongle with AcroRip software to manage DTF printing colours properly
1 16 GB USB Flash Drive
6 90 ml water-based ink bottles (CMYK + White + White)
20 A4 (Ref. 040297) or A4 (Ref. 040040) translucent PET sheets
1 500 g bottle of adhesive powder

(*) Brildor offers a warranty of 30 calendar days, estimated time for installing and starting your printer, provided that all the consumables used have been purchased from Brildor.

DTF PRINTER (A4 & A3)

The printers included in this pack are the Epson L805 (Ref. 040297) or the L1800 (Ref. 040040) model. This high-quality inkjet printer has been modified to use the DTF printing technique. Both usability and hardware have been modified. Some of its features are described below:

  • Originally, this printer includes 6 refillable ink tanks for yellow, black, light cyan, light magenta, magenta, and cyan colours (Y, K, LC, LM, M, C).
  • In DTF printing, the tanks intended for light cyan and light magenta (LC and LM) will be used for the white ink. This will allow this colour to be used in the design and print the underbase.
  • Original front rollers have been removed to avoid print marks.
  • A maintenance tank has been added.
  • 2 trays are included. One standard pull-out tray and a flat one, acting as a support for the film. To prevent the printheads from touching the film, you must use the flat tray, as its height is in line with the film output. This will avoid ink mixing and shifting.
  • Connectivity: the L805 printer has both USB and Wi-Fi connections. The L1800 printer connects via USB only (Wi-Fi not supported)

PRINTER DIMENSIONS (APPROX.)

DTF A4
Ref. 040297
DTF A3
Ref. 040040
Max. print size 29.7 x 21 cm (DIN A4) 29.7 x 42 cm (DIN A3)
Printer dimensions 54,5 x 18,6 x 28 cm 70.5 x 21.5 x 32.2 cm
Flat tray dimensions 22,8 x 4,7 x 33 cm 33.5 x 7 x 39 cm
Net weight 6 kg 12.2 kg
Packaging 70 x 26 x 44 cm 85 x 34.3 x 48 cm


ACRORIP SOFTWARE

Acts as a translator for the original printer software, making it capable of printing coloured and white layers as required by the DTF technique.

  • It controls the print’s size and quality, manages its colour, the white underbase, and the order in which each layer is printed.
  • The white mask ensures that the colours of the design remain the same after being applied to the substrate.
  • Both the design and its underbase can be printed at the same time.
  • Compatible with Windows 10.
  • AcroRip is not compatible with macOS devices. If you are a Mac user, our recommendation is to install Parallels, VMware Fusion, or to create a Windows partition with Bootcamp.

FABRIC PRINTING INK

  • Water-based and thinner than the inks used for DTG printing.
  • They guarantee flexible prints blended with the fabric that doesn’t crack when stretched.


FILMS

They act as a support for the ink to transfer the design to the fabric.

  • Made of PET, a thermoplastic material highly resistant to heat and handling when applying this technique.
  • Similar to acetates but translucent. You can see the design on both sides of the film.
  • They keep the ink wet but prevent migration.


DTF POWDER

Polyamide powder that creates an adhesive layer on the film previously printed with the design:

  • They are spread on wet ink and will stick to it. The remaining powder can be reused.
  • Heat will solidify the powder and form an adhesive layer.

How to print cotton and polyester fabrics with DTF?

STEP 1. PREPARING THE FILM

  • Print the design on the film in mirror image, including a white top layer at the end.
  • Carefully remove the film from the printer without touching the wet ink.
  • Preheat the press to 165ºC (*)
  • Spread DTF powder on the printed design. Store the remaining powder in a container to protect it from humidity.
  • Place the film on the press’ lower platen and lower the upper platen to keep it 3-4 cm from the film, without touching it, for 2 minutes.

(*) If you don't want to apply the design onto the fabric immediately, you should cure the powder for 8-10 minutes at 190ºC. This will allow the film to work as a screen print transfer, and you will be able to use it whenever you like.

STEP 2. TRANSFERRING YOUR DESIGN TO THE FABRIC

  • If the garment is made of cotton, prepress it at 165ºC
  • Place the film on the area you want to print.
  • Press for 15 seconds at 165ºC, medium-heavy pressure when personalising cotton fabrics.
  • Press for 50 seconds at 140 ºC, medium-heavy pressure when personalising polyester fabrics.
  • Once the pressing time is finished, remove the fabric from the press and allow it to cool down.
  • Peel slowly but steadily.
  • Your garment is now ready!

Additional Information

Reference nº 927 384
Post your question

Questions and Answers

There are no entries.

The legal stuff about cookies:


This message requires us to tell you about ourcookie policy.

If you continue browsing, we'll assume you accept it and think it's okay.

Don't worry, this message only comes up once.