Loading..

Product was successfully added to your shopping cart.
€1,499.00

DTF Printer Bundle - CADlink Edition

Ref. 041079

DTF Printer Bundle - CADlink Edition

  • DTF Printer Bundle - CADlink Edition - Personalisation example
  • DTF Printer Bundle - CADlink Edition - Personalisation example
  • DTF Printer Bundle - CADlink Edition - Epson printer (modified)
  • DTF Printer Bundle - CADlink Edition - Refillable ink tanks
  • DTF Printer Bundle - CADlink Edition - Interface
  • DTF Printer Bundle - CADlink Edition - Waste ink collector unit
  • DTF Printer Bundle - CADlink Edition - Printed film
  • DTF Printer Bundle - CADlink Edition - Printed film details
  • DTF Printer Bundle - CADlink Edition - 10-film pack (A3)
  • DTF Printer Bundle - CADlink Edition - DTF inks
  • DTF Printer Bundle - CADlink Edition - DTF powder
  • DTF Printer Bundle - CADlink Edition - USB
  • DTF Printer Bundle - CADlink Edition - 0.3 mm thick clear plastic sheets
  • DTF Printer Bundle - CADlink Edition - 3 mm thick MDF boards
€1,499.00

DTF Printer Bundle - CADlink Edition

Ref. 041079

Direct To Film printing system with professional RIP software included, and everything you need to personalise almost any fabric and rigid items regardless of their colour. Simple, user-friendly interface with full control of the image for top quality prints.

This system includes:

  • Inkjet printer: modified for DTF.
  • DTF powder: 500 g bottle.
  • Fabric printing ink: 6 CMYK bottles + White + White (90 ml)
  • Film: 20 x A3 sheets.
  • CADlink Digital Factory v10 DTF Edition software: to manage the printing of the design.
  • Cleaning solution for digital printers: 100 ml bottle.

More information

+ Read More
- Read Less
Availability:
  • Immediate: 23 units
Is our availability not enough? Ask to be notified of upcoming entries.

REQUEST NOTICE
€1,499.00
/ Each Unit VAT not included
For each unit you buy, you will accumulate 44,70€ to redeem on your next order. Discover the Brildor Loyalty Program

Brildor Club is a direct discount program for your purchases. Whenever you place an order (minimum purchase of €10), some discount balance will be generated into your customer account for you to use on your next purchase. The more you buy, the more you save.
You will get access to the Brildor Club as soon as you register as a new customer, and will receive a €5 welcome balance.

 

How do I get some discount balance?


As a Regular Brildor Member:

  • On orders up to €180, you may receive €0.20 for every €10 you spend
  • On orders over €180, you may receive €0.30 for every €10 you spend
  • We will give you an extra €10 if you make 10 purchases over €100


As a Premium Brildor Member:

If you are a Premium Member of the Brildor Club, you will accumulate 25% more balance, so you can obtain:

  • On orders up to €180, you may receive €0.25 for every €10 you spend
  • On orders over €180, you may receive €0.375 for every €10 you spend

  

Who are Premium Brildor Members?


If over the last 12 months your purchases have exceeded €3,000, you will automatically be upgraded to the Premium Brildor Member category. This amount is checked daily. As soon as you reach it, you will become a Premium Member the day after.

 

Terms and conditions of the Brildor Club

  • Loyalty balance will be added when placing an order with an immediate payment method (Credit/debit card, Paypal and Pagantis).
  • Your balance will show in the "Your credit" section inside "Your account", and you can use it by selecting "Payment methods".
  • You can use your balance without needing to have a minimum accumulated amount or reach a minimum order value. Nonetheless, you won't be able to get a higher discount than your order value.
  • Balance expires after 6 months without making any purchase.
  • The balance is calculated on the net amount of the purchase: excluding taxes, shipping, coupons, and promotional discounts.
  • The cancellation of an order implies the loss of the balance generated in that purchase.
  • On a full-order return, the amount to be refunded will be the amount paid by the customer.
  • If the return of the order is due to causes beyond the control of Brildor, the redeemed balance won't be restored. However, the balance generated with this purchase won't be removed.
DTF Printer Bundle - CADlink Edition Description

More information about the CADlink Edition DTF printer bundle

  • New personalisation technique: DTF means Direct To Film. This technique consists of printing a design onto a film and transferring it to a garment, accessories, and many more by applying heat.
  • Simple: easy to learn and apply, without the need for a major initial investment.
  • Versatile: it allows you to personalise almost any fabric, regardless of its colour. You can apply it on cotton, polyester, and blends of those two materials. It is also suitable for nylon and leather.
  • Excellent personalisation alternative: to apply where other techniques can’t be used or fail. It is the case with dye sublimation, which application is limited to white or light-coloured polyester fabrics.
  • Cheaper and less complex than other techniques: for example, white toner transfer. A + B sheets are more expensive, and the process is more complicated. DTF is similar to Sublimagic and No-Cut transfer but benefits from a lower cost and easier applicability.
  • Efficient: both in short and long print runs. You can print your design on the film and store it as you would for a screen print transfer until it is ready to be applied on a garment.
  • High-quality results: colourful prints with excellent elasticity, fully blended into the fabric. Very soft and pleasant to the touch.

WHAT DOES BRILDOR'S DTF BUNDLE INCLUDE?

Brildor’s DTF printing bundle includes everything you need to start personalising at the lowest cost. All you need is a heat press.

1 Epson EcoTank L1800 inkjet printer, duly modified to work as a DTF printer(*)
1 USB dongle with CADlink Digital Factory v10 DTF Edition RIP software to manage DTF printing colours properly
6 90 ml water-based ink bottles (CMYK + White + White)
20 A3 Translucent PET sheets
1 500 g bottle of adhesive powder
1 100 ml bottle of cleaning solution for digital printers - Ref. 036319 (**)
1 40 x 30 cm MDF board (3 mm) - Ref. 039067 (**)
8 25 x 35 cm clear plastic sheets - Ref. 040378 (**)

(*) Brildor offers a warranty of 30 calendar days, estimated time for installing and starting your printer, provided that all the consumables used have been purchased from Brildor.

(**) The MDF board must be placed on the vertical paper input tray. This will help you get a better input of the film. The 8 clear plastic sheets are for nozzle testing, so you don’t need to spend DTF film for this purpose. For more detailed information, you may refer to the product sheet, which you will find in Related Products.

A3 DTF PRINTER

The printer included in this pack is the Epson L1800 model. This high-quality inkjet printer has been modified to use the DTF printing technique. Both usability and hardware have been modified. Some of its features are described below:

  • Originally, this printer includes 6 refillable ink tanks for yellow, black, light cyan, light magenta, magenta, and cyan (Y, K, LC, LM, M, C).
  • In DTF printing, the tanks intended for light cyan and light magenta (LC and LM) will be used for the white ink. This will allow this colour to be used in the design and print the underbase.
  • Original front rollers have been removed to avoid print marks.
  • A maintenance tank has been added.
  • 2 trays are included. One standard pull-out tray and a flat one, acting as a support for the film. To prevent the printheads from touching the film, you must use the flat tray, as its height aligns with the film output. This will avoid ink mixing and shifting.
  • Connectivity: the L1800 printer connects via USB (cable included) and does not support Wi-Fi connectivity.

THINGS TO KEEP IN MIND

  • After installing the inks, the printer must be operated at least once a week. That is because white ink sediments quickly, which can cause damage to the printhead.
  • In Related Products, you will find a kit for proper maintenance of the Epson L1800 printheads (Ref. 034220).

DIMENSIONS (APPROX.)

Max. print size 29.7 x 42 cm (DIN A3)
Printer dimensions 70.5 x 21.5 x 32.2 cm
Flat tray dimensions 33.5 x 7 x 39 cm
Net weight 12.2 kg
Packaging 85 x 34.3 x 48 cm


CADLINK DIGITAL FACTORY V10 DTF EDITION RIP SOFTWARE

This version of CADlink software has been specially developed for DTF printing. It allows full control of the image, helping you achieve high-quality printing and optimise the printing process to the maximum.

  • Very simple, user-friendly interface with quick responsiveness.
  • It controls the print’s size and quality, manages its colour, the white underbase, and many more.
  • Image editing through GIMP, a free software similar to Photoshop and optimised to interact comfortably with the RIP without exiting the programme.
  • Super Size Image: increases the resolution to avoid visible pixels in non-vector images.
  • The white mask ensures that the colours of the design remain the same after being applied to the substrate.
  • KnockMeBlackOut: a setting for designs to be printed on black garments. It removes unneeded black areas from the design, consequently saving ink.
  • KnockMeColorOut: allows you to select and remove up to 4 colours from the design with a single click.
  • Control of white and colour ink flow to optimise consumption and calculate costs per print.
  • Real-time nozzle checks, automatic printhead cleaning, and maintenance alert notifications.
  • This software allows you to program the printer to switch on automatically at a set frequency, simplifying maintenance work.
  • Supports countless vector and pixel file formats such as BMP, GIF, JPG, JPEG, PNG, PING, TIF, TIFF, PSD, SVG, PS, TMP, EPS, AI and PDF.
  • Compatible with Windows 10.
  • CADlink is not compatible with macOS devices. If you are a Mac user, our recommendation is to install Parallels, VMware Fusion, or create a Windows partition with Bootcamp.
  • For more detailed information, you may refer to the software’s product sheet, which you will find in Related Products (Ref. 040631)

WHAT’S IN THE DONGLE?

  • Licence files (xxxxxxHM), where x is the dongle number
  • Program files (Digital Factory v10)
  • Quick setup sheet in PDF
  • Setup wizard link (setup.exe)

To install the software, connect the USB to the computer, run Setup.exe and follow the on-screen instructions.

FABRIC PRINTING INK

  • Water-based and thinner than the inks used for DTG printing.
  • They guarantee flexible prints blended with the fabric that doesn’t crack when stretched.


FILMS

They act as a support for the ink to transfer the design to the fabric.

  • Made of PET, a thermoplastic material highly resistant to heat and handling when applying this technique.
  • Similar to acetates but translucent. You can see the design on both sides of the film.
  • They keep the ink wet but prevent migration.


DTF POWDER

Polyamide powder that creates an adhesive layer on the film previously printed with the design:

  • They are spread on wet ink and will stick to it. The remaining powder can be reused.
  • Heat will solidify the powder and form an adhesive layer.

How to print cotton and polyester fabrics with DTF?

STEP 1. PREPARING THE FILM

  • Print the design on the film in mirror image, including a white top layer at the end.
  • Carefully remove the film from the printer without touching the wet ink.
  • Preheat the press to 165ºC (*)
  • Spread DTF powder on the printed design. Store the remaining powder in a container to protect it from humidity.
  • Place the film on the press’ lower platen and lower the upper platen to keep it 3-4 cm from the film, without touching it, for 2 minutes.

(*) If you don't want to apply the design onto the fabric immediately, you should cure the powder for 8-10 minutes at 190ºC. This will allow the film to work as a screen print transfer, and you will be able to use it whenever you like.

STEP 2. TRANSFERRING YOUR DESIGN TO THE FABRIC

  • If the garment is made of cotton, prepress it at 165ºC
  • Place the film on the area you want to print.
  • Press for 15 seconds at 165ºC, medium-heavy pressure when personalising cotton fabrics.
  • Press for 50 seconds at 140 ºC, medium-heavy pressure when personalising polyester fabrics.
  • Once the pressing time is finished, remove the fabric from the press and allow it to cool down.
  • Peel slowly but steadily.
  • Your garment is now ready!

Additional Information
Reference nº 041 079
Billable Weight 16.9000
Post your question

Questions and Answers

There are no entries.

DTF Printer Bundle - CADlink Edition Description

More information about the CADlink Edition DTF printer bundle

  • New personalisation technique: DTF means Direct To Film. This technique consists of printing a design onto a film and transferring it to a garment, accessories, and many more by applying heat.
  • Simple: easy to learn and apply, without the need for a major initial investment.
  • Versatile: it allows you to personalise almost any fabric, regardless of its colour. You can apply it on cotton, polyester, and blends of those two materials. It is also suitable for nylon and leather.
  • Excellent personalisation alternative: to apply where other techniques can’t be used or fail. It is the case with dye sublimation, which application is limited to white or light-coloured polyester fabrics.
  • Cheaper and less complex than other techniques: for example, white toner transfer. A + B sheets are more expensive, and the process is more complicated. DTF is similar to Sublimagic and No-Cut transfer but benefits from a lower cost and easier applicability.
  • Efficient: both in short and long print runs. You can print your design on the film and store it as you would for a screen print transfer until it is ready to be applied on a garment.
  • High-quality results: colourful prints with excellent elasticity, fully blended into the fabric. Very soft and pleasant to the touch.

WHAT DOES BRILDOR'S DTF BUNDLE INCLUDE?

Brildor’s DTF printing bundle includes everything you need to start personalising at the lowest cost. All you need is a heat press.

1 Epson EcoTank L1800 inkjet printer, duly modified to work as a DTF printer(*)
1 USB dongle with CADlink Digital Factory v10 DTF Edition RIP software to manage DTF printing colours properly
6 90 ml water-based ink bottles (CMYK + White + White)
20 A3 Translucent PET sheets
1 500 g bottle of adhesive powder
1 100 ml bottle of cleaning solution for digital printers - Ref. 036319 (**)
1 40 x 30 cm MDF board (3 mm) - Ref. 039067 (**)
8 25 x 35 cm clear plastic sheets - Ref. 040378 (**)

(*) Brildor offers a warranty of 30 calendar days, estimated time for installing and starting your printer, provided that all the consumables used have been purchased from Brildor.

(**) The MDF board must be placed on the vertical paper input tray. This will help you get a better input of the film. The 8 clear plastic sheets are for nozzle testing, so you don’t need to spend DTF film for this purpose. For more detailed information, you may refer to the product sheet, which you will find in Related Products.

A3 DTF PRINTER

The printer included in this pack is the Epson L1800 model. This high-quality inkjet printer has been modified to use the DTF printing technique. Both usability and hardware have been modified. Some of its features are described below:

  • Originally, this printer includes 6 refillable ink tanks for yellow, black, light cyan, light magenta, magenta, and cyan (Y, K, LC, LM, M, C).
  • In DTF printing, the tanks intended for light cyan and light magenta (LC and LM) will be used for the white ink. This will allow this colour to be used in the design and print the underbase.
  • Original front rollers have been removed to avoid print marks.
  • A maintenance tank has been added.
  • 2 trays are included. One standard pull-out tray and a flat one, acting as a support for the film. To prevent the printheads from touching the film, you must use the flat tray, as its height aligns with the film output. This will avoid ink mixing and shifting.
  • Connectivity: the L1800 printer connects via USB (cable included) and does not support Wi-Fi connectivity.

THINGS TO KEEP IN MIND

  • After installing the inks, the printer must be operated at least once a week. That is because white ink sediments quickly, which can cause damage to the printhead.
  • In Related Products, you will find a kit for proper maintenance of the Epson L1800 printheads (Ref. 034220).

DIMENSIONS (APPROX.)

Max. print size 29.7 x 42 cm (DIN A3)
Printer dimensions 70.5 x 21.5 x 32.2 cm
Flat tray dimensions 33.5 x 7 x 39 cm
Net weight 12.2 kg
Packaging 85 x 34.3 x 48 cm


CADLINK DIGITAL FACTORY V10 DTF EDITION RIP SOFTWARE

This version of CADlink software has been specially developed for DTF printing. It allows full control of the image, helping you achieve high-quality printing and optimise the printing process to the maximum.

  • Very simple, user-friendly interface with quick responsiveness.
  • It controls the print’s size and quality, manages its colour, the white underbase, and many more.
  • Image editing through GIMP, a free software similar to Photoshop and optimised to interact comfortably with the RIP without exiting the programme.
  • Super Size Image: increases the resolution to avoid visible pixels in non-vector images.
  • The white mask ensures that the colours of the design remain the same after being applied to the substrate.
  • KnockMeBlackOut: a setting for designs to be printed on black garments. It removes unneeded black areas from the design, consequently saving ink.
  • KnockMeColorOut: allows you to select and remove up to 4 colours from the design with a single click.
  • Control of white and colour ink flow to optimise consumption and calculate costs per print.
  • Real-time nozzle checks, automatic printhead cleaning, and maintenance alert notifications.
  • This software allows you to program the printer to switch on automatically at a set frequency, simplifying maintenance work.
  • Supports countless vector and pixel file formats such as BMP, GIF, JPG, JPEG, PNG, PING, TIF, TIFF, PSD, SVG, PS, TMP, EPS, AI and PDF.
  • Compatible with Windows 10.
  • CADlink is not compatible with macOS devices. If you are a Mac user, our recommendation is to install Parallels, VMware Fusion, or create a Windows partition with Bootcamp.
  • For more detailed information, you may refer to the software’s product sheet, which you will find in Related Products (Ref. 040631)

WHAT’S IN THE DONGLE?

  • Licence files (xxxxxxHM), where x is the dongle number
  • Program files (Digital Factory v10)
  • Quick setup sheet in PDF
  • Setup wizard link (setup.exe)

To install the software, connect the USB to the computer, run Setup.exe and follow the on-screen instructions.

FABRIC PRINTING INK

  • Water-based and thinner than the inks used for DTG printing.
  • They guarantee flexible prints blended with the fabric that doesn’t crack when stretched.


FILMS

They act as a support for the ink to transfer the design to the fabric.

  • Made of PET, a thermoplastic material highly resistant to heat and handling when applying this technique.
  • Similar to acetates but translucent. You can see the design on both sides of the film.
  • They keep the ink wet but prevent migration.


DTF POWDER

Polyamide powder that creates an adhesive layer on the film previously printed with the design:

  • They are spread on wet ink and will stick to it. The remaining powder can be reused.
  • Heat will solidify the powder and form an adhesive layer.

How to print cotton and polyester fabrics with DTF?

STEP 1. PREPARING THE FILM

  • Print the design on the film in mirror image, including a white top layer at the end.
  • Carefully remove the film from the printer without touching the wet ink.
  • Preheat the press to 165ºC (*)
  • Spread DTF powder on the printed design. Store the remaining powder in a container to protect it from humidity.
  • Place the film on the press’ lower platen and lower the upper platen to keep it 3-4 cm from the film, without touching it, for 2 minutes.

(*) If you don't want to apply the design onto the fabric immediately, you should cure the powder for 8-10 minutes at 190ºC. This will allow the film to work as a screen print transfer, and you will be able to use it whenever you like.

STEP 2. TRANSFERRING YOUR DESIGN TO THE FABRIC

  • If the garment is made of cotton, prepress it at 165ºC
  • Place the film on the area you want to print.
  • Press for 15 seconds at 165ºC, medium-heavy pressure when personalising cotton fabrics.
  • Press for 50 seconds at 140 ºC, medium-heavy pressure when personalising polyester fabrics.
  • Once the pressing time is finished, remove the fabric from the press and allow it to cool down.
  • Peel slowly but steadily.
  • Your garment is now ready!

Additional Information

Reference nº 041 079
Billable Weight 16.9000
Post your question

Questions and Answers

There are no entries.

The legal stuff about cookies:


This message requires us to tell you about our cookie policy.

If you continue browsing, we'll assume you accept it and think it's okay.

Don't worry, this message only comes up once.