Search
Starting at:
€8.33
/ Each Unit
Sublimation Hooded Baby Towel
Ref.
038787
A poncho baby towel you can personalise using dye sublimation printing, embroidery, and screen printing. With a hood made of the same fabric as the towel.
- Made of white polyester (50%) and cotton (50%) on the outside, suitable for sublimation.
- Inside made of absorbent 100% cotton terry.
- Print area: 75.5 x 99 cm (towel) and 26 x 50 cm (hood).
Availability:
Immediate: 37 units
Expected entries:
22/06/24: 10 units
Expected entries:
22/06/24: 10 units
Please, give us an estimate of the quantity you need:
As a Premium Brildor Member, for each unit you buy, you will accumulate {{POINTS}}
to redeem on your next order. Discover the Brildor Loyalty Program.
For each unit you buy, you will accumulate {{POINTS}} to redeem
on your next order. Discover the Brildor Loyalty Program.
Related Products
More information about the hooded baby towel for sublimation
- Perfect for use as a bath towel for babies and toddlers or as a blanket for extra warmth.
- Suitable for sublimation on the outside of the towel.
- Made of white polyester (50%) and cotton (50%).
- Its inner side, the one in contact with the baby, is made of absorbent 100% cotton terry.
- Very soft and pleasant to the touch on the outside.
- With a white border, the same colour as the fabric.
- The towel's rectangular area can be personalised with full print sublimation.
- Due to the shape of the hood, printing it entirely can be challenging. For it to be easier and for optimal results, partial sublimation is recommended.
DIMENSIONS (APPROX.)
| Towel | 100 x 99 cm |
| Hood | 50 x 23 cm |
| Thickness | 5 mm |
| Print area | 100 x 99 cm |
Recommended instructions and parameters for sublimation printing
- Print the design in mirror image.
- Preheat the press to 190-200ºC.
- Insert a piece of paper or cardboard inside the hood. This will prevent ink transfers to the towel.
- Position the printed design on the towel's printable area. Secure them with heat-resistant tape so they won't move.
- Place the towel on the press’ lower platen.
- Press for 40-50 seconds, medium-heavy pressure.
- Using a protective glove, remove the newly printed towel.
- Remove the paper carefully.
| Ref. | 038787 |
|---|---|
| Gross Weight (kg) | 0.362 |
| Billable Weight (kg) | 0.4000 |
| Dimensions (mm) | 1000 x 990 |
| Print area (mm) | 1000 x 990 |
| Thickness (mm) | 5 |
| Colour | White |
| Surface material | Tissue |
| Items | Towels |
| Composition | Cotton, Polyester |
| Accessory details | Hood |
| Marking techniques | Dye sublimation, Screen printing, Embroidery |
Write Your Own Review
Post your question