Some shipping restrictions must be solved. Please, check them out.
00
https://www.brildor.com/en/blanks/sublimation-beer-steins-and-glasses/sublimation-beer-stein-frosted-glass.html5089Sublimation Beer Stein - Frosted Glass - Pack of 2 units<p><a name="know-more1"></a></p>
<h3>More information about the frosted glass beer stein for sublimation</h3>
<ul>
<li>Spectacular and elegant mug, specially designed for drinking beer.</li>
<li>Dishwasher and microwave safe.</li>
<li>Slightly conical shape, almost imperceptible.</li>
<li>Solid base with star-shaped outer design.</li>
<li>Strong oversized handle, designed to comfortably place your thumb.</li>
<li>Printable with a Mug Press and a Sublimation Oven. It is also possible to sublimate this beer stein using a 3D Vacuum Heat Press.</li>
<li>With the 3D heat press, it is recommended to use a silicone mould like the one you can find in <strong>Related Products</strong>.</li>
<li>In <strong>Related Products</strong>, you may also find some accessories that will help you sublimate this mug using a sublimation oven: beer stein wraps, silicone sheets, and heat shrink bags.</li>
</ul>
<p></p>
<p><strong>DIMENSIONS (APPROX.)</strong></p>
<table border="0">
<tbody>
<tr>
<td><strong>Volume capacity<br /></strong></td>
<td><span class="azul-negrita">17 oz</span> - <span class="azul-negrita">500 ml</span></td>
</tr>
<tr>
<td><strong>Base</strong></td>
<td><span class="azul-negrita">Ø8 cm<br /></span></td>
</tr>
<tr>
<td><strong>Rim</strong></td>
<td><span class="azul-negrita">Ø7.2 cm<br /></span></td>
</tr>
<tr>
<td><strong>Height</strong></td>
<td class="azul-negrita">15 cm</td>
</tr>
<tr>
<td><strong>Thickness</strong></td>
<td class="azul-negrita">3.34 mm</td>
</tr>
<tr>
<td><strong>Handle</strong></td>
<td class="azul-negrita">1.8 x 11 cm</td>
</tr>
<tr>
<td><strong>Handle thickness </strong></td>
<td class="azul-negrita">1.33 cm</td>
</tr>
<tr>
<td><strong>Stein-handle distance</strong></td>
<td class="azul-negrita">3 cm</td>
</tr>
<tr>
<td><strong>Print area</strong></td>
<td class="azul-negrita">22 x 14 cm</td>
</tr>
</tbody>
</table>
<p></p>
<p></p>
<p></p>
<p></p>
<p></p>
<p><a name="know-more2"></a></p>
<h3>Recommended instructions and parameters for sublimation printing</h3>
<p>In cold temperatures, it is recommended to preheat the jar with a hairdryer to avoid sudden temperature changes that could break the glass.</p>
<p><strong>WITH A MUG HEAT PRESS</strong></p>
<ul>
<li>Print the design in <strong>mirror image</strong>.</li>
<li>Preheat the press to <span class="azul-negrita">180ºC</span>.</li>
<li>Hold the paper's printed side against the mug and fix it with Heat Resistant Tape.</li>
<li>Place the beer stein upside down into the press, for the Mug Heater to cover all the area you want to sublimate. Make sure to centre the handle correctly.</li>
<li>Close the press at<strong> medium pressure</strong> for <span class="azul-negrita">300-400 seconds</span></li>
<li>Using a protective glove, remove the newly printed mug.</li>
<li>When cool, remove the paper carefully.</li>
</ul>
<p><strong>WITH A SUBLIMATION OVEN</strong></p>
<ul>
<li>Print the design in <strong>mirror image</strong>.</li>
<li>Preheat the oven to <span class="azul-negrita">200ºC</span>.</li>
<li>Hold the paper's printed side against the stein and fix it with Heat Resistant Tape.</li>
<li>Adjust the wrap or the silicone sheet to the beer stein. If you are using a Heat Shrink Bag, insert the mug inside it and create a vacuum with a Heat Gun.</li>
<li>Sublimate inside the oven for <span class="azul-negrita">8 minutes</span>.</li>
<li>Using a protective glove, remove the beer stein from the oven.</li>
<li>Remove the wrap, silicone sheet or the bag from the stein.</li>
<li>When cool, remove the paper carefully.</li>
</ul>
<p><strong>WITH A 3D VACUUM HEAT PRESS<br /></strong></p>
<ul>
<li>Print the design in <strong>mirror image</strong>.</li>
<li>Preheat the 3D Oven to <span class="azul-negrita">200ºC</span>.</li>
<li>Place the printed design around the stein and attach them with heat resistant tape.</li>
<li>Place the beer stein inside the mould and insert them into the oven. Connect the vacuum tube to the mould.</li>
<li>Sublimate inside the oven for <span class="azul-negrita">8 minutes</span>.<span class="azul-negrita"></span></li>
<li>Using a protective glove, remove the beer stein from the oven.</li>
<li>Remove it from the mould.</li>
<li>When cool, remove the paper carefully.</li>
</ul>https://www.brildor.com/media/catalog/product/m/s/msb12820000mtb32-d6.jpg7.9outofstock7.97.900Microtec000https://www.brildor.com/media/catalog/product/m/s/msb12820000mtb32-d6.jpg4968508819782199322039222593237022373924795255802604026443/Blanks/Blanks/Hospitality/Blanks/Beer Steins & Glasses/Blanks/Souvenirs
Since 1 January 2021, deliveries to the United Kingdom are subject to new import procedures. Check here how this could affect your order.
Bienvenido a la Tienda Brildor, máquinas y artículos personalizables
