Starting at: €1.59 / Each Unit

Sublimation "Baby on Board" Sign

Ref.
032006

A "Baby on Board" sign you can personalise using dye sublimation printing. A fun and original way of warning drivers that there are kids inside the car.

  • Made of medium-density fibreboard (MDF). Square-shaped, white-coloured and with gloss finish.
  • Includes 2 suction cups to stick it to a window.
  • Print area: 13 x 13 cm

More information

How to sublimate this sign?

Availability:
Immediate: 113 units
Our availability is not enough?
Let us know how much you need
I WANT MORE
€1.99 VAT not included / Each Unit
VAT not included
  • Buy 5 for €1.89 each
  • Buy 20 for €1.79 each
  • Buy 50 for €1.69 each
  • Buy 100 for €1.59 each
Reward Points
As a Premium Brildor Member, for each unit you buy, you will accumulate {{POINTS}} to redeem on your next order. Discover the Brildor Loyalty Program. For each unit you buy, you will accumulate {{POINTS}} to redeem on your next order. Discover the Brildor Loyalty Program.

More information about the "Baby on Board" sign for sublimation

  • Especially useful to warn about the presence of children, pregnant women, or pets inside the car.
  • This wooden sign of multiple uses is also known as MDF (medium-density fibreboard).
  • Matte black edges and back.
  • Rounded corners with 2 holes to place the suction cups.
  • White printable side covered with a clear protective sheet that must be peeled off before sublimation.

THINGS TO KEEP IN MIND

  • Although it does not interfere with print quality, the edges may contain some residue from the laser cut and stain when touched. If this happens, it is recommended to clean the sign with a damp cloth before its sublimation.

DOWNLOAD HERE

DIMENSIONS (APPROX.)

Sign 13 x 13 cm
Thickness 3 mm
Hole Ø5 mm
Suction cup Ø2 x 1 cm
Print area 13 x 13 cm

Recommended instructions and parameters for sublimation printing

  • Print the design in mirror image.
  • Preheat the press to 180-200 ºC
  • Remove the clear protective plastic from the sign's printable side.
  • Place the sign on the press between two protective papers and pre-press it for 10 seconds. This will remove any moisture the wood may have absorbed.
  • Place the sign back on the press' lower plate with its printable side facing up and the paper's printed side against it. Fix them with heat-resistant tape.
  • Close the press at medium pressure for 80-85 seconds
  • Using a protective glove, remove the newly printed sign.
  • Remove the paper carefully.
  • Place the suction cups in the holes so that the sign is ready to use.
More Information
Ref. 032006
Gross Weight (kg) 0.070
Billable Weight (kg) 0.0800
Dimensions (mm) 130 x 130
Print area (mm) 130 x 130
Thickness (mm) 3
Colour White
Surface material Wood
Items Signs
Marking techniques Dye sublimation
Write Your Own Review
Post your question