Shield Badges - 50x70mm

Shield-shaped metal badges you can personalise with our manual assembly machine and the 50 x 70 mm mould. Available in the following model:

  • Pin

Components of the shield pin badge.

How to personalise these badges?

Availability:
Shown on each product
Product
Price
Availability
Qty
Favorites
Pin - Bag 10 units Ref: 037609
Pin Badges - Shield - 50x70mm - Bag of 10 units
€4.45 VAT not included / Each Unit
Availability Immediate: 11 units
Pin - Bag 100 units Ref: 037602
Pin Badges - Shield - 50x70mm - Bag of 100 units
€29.95 VAT not included / Each Unit
Availability Immediate: 3 units
Expected entries:

03/05/24: 2 units
shield Mould + Badges Ref: 037598
Shield Mould with Samples for Badge Making Machines - 50x70mm
€229.00 VAT not included / Each Unit
Availability Immediate: 2 units
Expected entries:

03/05/24: 2 units
View Price
VAT not included
Reward Points
Get free € to redeem on your next order by buying these products. Discover the Brildor Loyalty Program Get free € to redeem on your next order by buying these products. Discover the Brildor Loyalty Program

Components of the 50 x 70 mm shield badges

PIN - REF. 037609 & 037602

The badge includes a safety pin to attach it to clothing. Sale unit: 10 and 100-badge bags.

  • 1 protective plastic film (Mylar).
  • 1 metal plate to personalise (front).
  • 1 metal plate with a pin (back).

How to personalise 50 x 70 mm shield badges?

STEP 1: PRINT THE DESIGN

  • Design the motif that you want to place on the badge. Use images, photos, logos... and a lot of creativity.
  • Prepare a template according to the size and shape of the badge. Remember that the template must have an additional border, on the outside, to fold and attach the design to the back of the badge.
  • Print your design on paper, with your usual printer. It is recommended to use paper sheets with a 100-110 g/m2 thickness.

Download the template to help you print your special badges in eps, psd or pdf format.

STEP 2: TRIM THE DESIGN

  • Cut the printed paper on the outermost edge. You may use scissors or a utility knife (cutter). It is convenient to use a die cutting machine or a plotter to be able to cut several designs at the same time. It will help you gain precision and speed, achieving a straight, clean, and homogeneous cut. (see in Related Products).

STEP 3: ASSEMBLE THE BADGES

  • Prepare the manual badge making machine
  • Set up the 50 x 70 mm shield-shaped mould on the machine.
  • Place the front of the badge on the mould's Part A, with the sharp metal edge down.
  • On this plate, place the design that you previously trimmed, and cover it with the protective plastic film.
  • Rotate the base until the Upper Part aligns with Part A.
  • Hold the machine with one hand and push the lever down with the other one. Apply pressure and pull the lever up. The front plate will remain on the Upper Part.
  • Place the back of the badge on Part B, with the sharp metal edge up. Try to align the plate with the positioning pin to ensure its correct orientation.
  • Rotate the base of the machine until the Upper Part aligns with Part B.
  • Hold the machine with one hand and push the lever down with the other one. Apply pressure and pull it back up.
  • Rotate the base of the machine again and remove the badge.

More Information
Ref. 925265
Write Your Own Review
Post your question